检测能力概览
Inspection at a Glance
6 大领域
核心检测能力
Inspection Domains
5 类实验室
专项检测与计量
Specialist Labs
CMM / NDT
尺寸与无损检测
Geometry & Integrity
全流程
材料到工艺验证
Process Verification
检测中心与服务范围
Laboratories & Services
材料、零件与制造工艺的综合验证
Verification for Materials, Parts & Processes
01 尺寸检测室 / Dimensional metrology
三坐标与轮廓测量 / CMM & contour checks
02 金相理化检测室 / Materials laboratory
成分、组织与硬度 / Chemistry, structure & hardness
03 性能检测室 / Performance laboratory
拉伸、冲击与扭矩 / Tensile, impact & torque
04 热处理检测室 / Heat-treatment testing
气氛、淬火介质与炉温 / Atmosphere, media & TUS
05 标准计量室 / Standards & calibration
量具与计量能力建设 / Gauges & metrology
配套无损检测 / NDT support
超声、磁粉与酸洗检查 / UT, MPI & acid etching
尺寸、缺陷与材料
Dimensions, Integrity & Chemistry
从几何符合性到内部质量与成分验证
Geometry, Internal Integrity & Material Composition
01 尺寸计量
Dimensional Metrology
三坐标与轮廓检测
通过三坐标测量及轮廓检测，核对零件尺寸、几何形状与图纸要求。
CMM and contour inspection verify dimensions and geometry against component drawings.
资料列示设备
德国 MORA 三坐标测量机，配合精密检测与标准计量能力。
The documented equipment includes a German MORA CMM, supported by precision inspection and metrology.
按图纸确认测量项目与验收公差。
Measurement features and tolerances are agreed from drawings.
02 无损与表面检查
NDT & Surface Inspection
超声检测 / Ultrasonic testing
水浸式超声探伤系统用于内部缺陷检查，结合零件形状与技术条件制定检测方案。
Immersion UT supports internal-defect inspection, with the method matched to geometry and specifications.
磁粉检测 / Magnetic particle inspection
荧光磁粉探伤用于铁磁性零件表面及近表面缺陷检查。
Fluorescent MPI checks surface and near-surface indications in ferromagnetic components.
酸洗检查 / Acid-etch inspection
擦拭酸洗检查作为表面检验手段，按零件技术要求选用。
Wipe acid etching is selected where required by component specifications.
03 成分与介质分析
Chemistry & Process Media
材料化学成分
SPECTRO 直读光谱仪、NCS 碳硫分析仪及 GAUSS 三气体分析仪，支持合金成分与 N/H/O 分析。
SPECTRO OES, NCS carbon/sulfur and GAUSS three-gas analysis support alloy chemistry and N/H/O checks.
热处理介质验证
KERUN 冷却速度测试仪评价淬火介质冷却特性；Mettler 水分分析仪用于水分检测。
KERUN cooling-rate testing evaluates quench media; Mettler analysis checks moisture content.
将材料及介质数据用于制造工艺评估。
Material and media data support process review.
组织、性能与计量
Structure, Performance & Metrology
结合实验室分析与工艺试验，验证零件质量要求
Laboratory Analysis & Process Tests for Component Quality
04 金相与硬度
Metallography & Hardness
组织观察与分析
Olympus、Zeiss 金相显微镜与金相自动评级软件，支持材料组织观察、评级及缺陷分析。
Olympus and Zeiss microscopy with automated rating software supports microstructure assessment and defect analysis.
硬度检测
洛氏、维氏及显微硬度检测，结合材料状态和热处理技术要求选择检测方法。
Rockwell, Vickers and microhardness testing are selected for material condition and heat-treatment requirements.
试样制备
自动镶嵌、磨抛设备支持标准化试样准备。
Automatic mounting, grinding and polishing support consistent specimen preparation.
05 性能与工艺试验
Performance & Process Tests
力学与功能验证
拉伸、冲击性能试验及锁紧盘扭矩试验，配合产品研发与性能评估。
Tensile, impact and shrink-disc torque tests support product development and performance evaluation.
热处理过程检测
气氛分析、淬火性能检测及炉温均匀性调查（TUS），用于评价关键工艺条件。
Atmosphere analysis, quench-performance testing and furnace temperature-uniformity surveys assess process conditions.
项目协同
与锻造、机加工和热处理环节配合，按图纸、材料及验收标准制定验证项目。
Inspection works with forging, machining and heat treatment to define checks against drawings and acceptance standards.
06 计量升级与项目对接
Metrology & Project Review
待上线设备 / Upcoming equipment
SJ5160-A 超高精度全自动光栅测长机，规划用于量块、环规、塞规及螺纹量规检定。
The upcoming SJ5160-A automatic grating length-measuring machine is intended for gauge blocks, ring, plug and thread gauges.
规划功能 / Planned functions
双向电子恒测力、温度补偿与三轴伺服驱动，支持自动计算、符合性判定及报告输出。
Bidirectional constant measuring force, temperature compensation and three-axis servo control support automatic calculations, conformity decisions and reports.
项目资料 / Project inputs
提供图纸、材料、检测标准、验收指标、数量及报告要求，以确认方法、取样与交付范围。
Share drawings, material, standards, limits, quantity and report needs to define methods, sampling and deliverables.